ASV RC30 Aux Connection block

sospd

LawnSite Member
Location
Illinois
I would like to change the couplers to the universal flat-face but would like to know if I could do it and retain the block with the pressure relief button? Is it easier / better to leave this alone and just assemble a "jumper" by connecting an RC30 connector to the but end of a universal flat-face?

Thanks
Bill

aux connect.JPG
 
OP
S

sospd

LawnSite Member
Location
Illinois
Did the new ones fit back into the block so you could retain the pressure relief button or did it eliminate it completely?
 

74inchShovel

LawnSite Member
Location
Spokane, Wa
It was no problem to retain the valve, which is great by the way. The only thing that changes is the outside of the couplers, the thread/fitting that goes inside the block is a standard type.
 
OP
S

sospd

LawnSite Member
Location
Illinois
It was no problem to retain the valve, which is great by the way. The only thing that changes is the outside of the couplers, the thread/fitting that goes inside the block is a standard type.
Thank you for the information, I really appreciate it.
Posted via Mobile Device
 

Top