1. Missed the live Ask the Expert event?
    Catch up on the conversation about fertilization strategies for success with the experts at Koch Turf & Ornamental in the Fertilizer Application forum.

    Dismiss Notice

Attn: Hydroseeding Junkies :-)

Discussion in 'Landscape Architecture and Design' started by turfquip, Aug 14, 2002.

  1. turfquip

    turfquip LawnSite Senior Member
    Messages: 860

    Today we shot Enviroblend 70/30 through our TQ 300 demo unit, mixing a bale and a half (90 lbs.) and applying it at the rate of 2500 lbs. per acre. We used 1.5 lbs. of tack per tankful.

    This is what 70/30 looks like at the rate of 2500 lbs/acre.

  2. Sean Gassman

    Sean Gassman LawnSite Member
    Messages: 77

    looks great, we usually shoot conwed 1000 ( solid wood) at no less than 2500 lbs, usually we apply at about 2700lbs.

    I stopped using 70/30 about two years ago..... I had several jobs were my mulch seperated.... the paper washed out and settled in the low spots. No respray would have been needed if this had not happened. So that I don't have to wonder what type of performance I will have I switched to 100% wood.

Share This Page