Anybody run Ballard Gold blades on their mowers? I currently use Oregon G5’s doubled up with a highlift, or shredder depending on the time of the yr and am quite happy with the cut and results, but always open to a better option.
Buy GOLD Hybrid Mower Blades: 16 1/4" Long, 2.5" Wide, 5/8" Center Hole, Thickness- .203"(Three Spindles) (SCAG) for USD 69.99-193.99 | Ballard
supposedly super hard edge that stays sharp longer…..I read about there x-blade setup but that’s garbage as blades don’t move when torqued properly.
Buy GOLD Hybrid Mower Blades: 16 1/4" Long, 2.5" Wide, 5/8" Center Hole, Thickness- .203"(Three Spindles) (SCAG) for USD 69.99-193.99 | Ballard
supposedly super hard edge that stays sharp longer…..I read about there x-blade setup but that’s garbage as blades don’t move when torqued properly.
) and said they cut very well, much better than the OEM blade. They worked very well for bag, side discharge, and mulch, no stragglers. Nothing bent, so far
