Lawn Care Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
53 Posts
Discussion Starter · #1 ·
I did a search and got some useful info but im looking for a little more help. If i were to charge 10$ a foot of edging for example would that include the materials or would the materials be added to that price. Also here in CT where it reaches freezing temps would laying them in 2" of concrete still be a good idea? what other ways are there of laying them? thanks alot

- Rob
 

·
Registered
Joined
·
346 Posts
Don’t use some miscellaneous lnft price, think of the task at hand and how long it will take you. Compensate for your overhead and time to complete the task. 2” of concrete isn’t going to do anything. If you are that lost, propose dry-setting the cobbles. Simply dig a trench, level the units on a base of dense grade, compact dense grade in front and behind each unit, and backfill with soils or aggregate.
 

·
Registered
Joined
·
69 Posts
BB must be set in 4" concrete footings or theres a chance they will heave after the winter thaw. Joints them properly and give them a concrete backfill with your trowel...should last a long time.....$10 LF. is about right for complete job.
 

·
Registered
Joined
·
481 Posts
I think that you ought to heed Captain's advice. What are you edging? Some trees, or a small landscape bed, or a driveway with heavy use? Also - what size block are you using - Jumbo - 4x8x11?, and are you setting them horizontally or vertically? This would drastically affect pricing.

If it was some light decorative style edging, dry setting will work, and makes adjustment later easy after mowers, or lawn tractors knock them around. Otherwise you need to have some sort of footing/solid base. If what you are doing is more of a curb than an edge, than you need to treat it as such.

We started selling landscape edging blocks for more coverage and ease of use. They look like jumbos, but measure 3x6x12, and cost slightly less, with the same look.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top