Blade confirguration

Discussion in 'Lawn Mowing' started by mowerman41, Oct 19, 2017.

  1. mowerman41

    mowerman41 LawnSite Senior Member
    Messages: 276

    I have used the G5's G6's and regular high lifts on my 60" Toro 3000. The G5 and G6 didn't have enough lift imo. So last week a decided to try something different on my left and center blades I ran G5's and my right blade (closest to discharge) I used a high lift blade. It worked very well, and will continue to use this. I side discharge some lawns and bag some and it really made a difference.
     
  2. Blainethompson

    Blainethompson LawnSite Senior Member
    Messages: 264

    Hustler uses similar set up when you purchase bagger. To medium lift blades and super high lift closest to the discharge. It's bags great and when side discharging it throws clippings almost 3 rows over.
     
  3. Big steve

    Big steve LawnSite Member
    Messages: 92

    I tried the super high lifts & g6's on a 60" Exmark & really didn't care for them either. Rob to much power. Couldn't find a part # for the g5's, but use g3's in the fall & really like them..
     

Share This Page