Blades on my Exmark won't tighten up.

Discussion in 'eXmark' started by Christianstine, Dec 31, 2002.

  1. Christianstine

    Christianstine LawnSite Member
    Messages: 28

    Just wondering if I could get some advice.I have a 2000
    exmark and at the end of last year I was unable to tighten
    the bolt that holds the blades on.I would grab the blade
    and try to tighten it and you could feel it slipping.
    :dizzy: Brian from Mi.
  2. eXmark

    eXmark Manufacturer / Sponsor
    Messages: 4,258


    If I had to guess I would say that you probably have some damaged threads on your blade bolt.

    Can you tell us what unit that you have? We have a few different types of spindles depending on your model.

    Thanks, Fred.
  3. crazygator

    crazygator LawnSite Bronze Member
    Messages: 1,048

    My 36" Turf Tracer has slots on the spindle just above the blades for a 1" wrench to fit and help tighten down. Could it be you didnt realize this was there, and therefore the slipping and not tightening? Just a thought!

Share This Page