bobcat s185 code

Discussion in 'Heavy Equipment & Pavement' started by kawakx125, Oct 23, 2013.

  1. kawakx125

    kawakx125 LawnSite Bronze Member
    Messages: 1,130

    getting code 14-02, something to do with fuel solenoid pull wire. anyone else with a bobcat had this code? if so what was the fix? machine will run fine for awhile then just shut off, restart for a couple seconds and shut off again. after about 20-30 min it starts again and runs for another 20-30 min then does the same thing. already checked and replaced the relay, didn't work. google leads me to believe its the fuel solenoid itself, dealer says its a relay or wiring, but i am inclined to think they want it in their shop to make money on diagnosing.
  2. bobcat_ron

    bobcat_ron LawnSite Fanatic
    Messages: 10,132

    Is that the solenoid that kills the fuel at the injection pump? If so, spray it with some WD40.
    Posted via Mobile Device
  3. kawakx125

    kawakx125 LawnSite Bronze Member
    Messages: 1,130

    I believe it is, it is the fuel shut off solenoid, located near the alternator.

Share This Page