Bradley 36 Hydro and Bradley Swivel Sulky advice needed

Discussion in 'Lawn Mowing Equipment' started by Ben Harms, Sep 24, 2018.

  1. Ben Harms

    Ben Harms LawnSite Member
    Messages: 41

  2. DXN1EL

    DXN1EL LawnSite Bronze Member
    from TEXAS
    Messages: 1,233

    Welding it:laugh:
     
  3. PremierLandscapeForsyth

    PremierLandscapeForsyth LawnSite Member
    Messages: 132

    I have same sulky on my scag … you must drill … not an issue though.
     
  4. Ben Harms

    Ben Harms LawnSite Member
    Messages: 41

    You think they'd design it better to eliminate having to drill or at least come up with some sort of adapter. Would you be able to send me a picture of your sulky installation when you get a chance?
     
  5. Hawkshot99

    Hawkshot99 LawnSite Bronze Member
    Messages: 1,706

    I have a different sulky from them mounted to my ferris. It uses the same mount plate though. It just requires drilling some holes. Make sure you look behind the metal piece before drilling. I had some important stuff that a drill bit would have damaged kinda close to the holes.
     
  6. Turf Tracer

    Turf Tracer LawnSite Platinum Member
    Messages: 4,001

    Easy mount.

     
  7. That Guy Gary

    That Guy Gary LawnSite Bronze Member
    Messages: 1,912

    I guess they could pre drill them on all the machines so you don't have too, but really whats wrong with bolts?

    Everything else on the mower is attached with bolts.
     
  8. PremierLandscapeForsyth

    PremierLandscapeForsyth LawnSite Member
    Messages: 132

    I will post some photos later … no harm done in drilling.
     
    Ben Harms likes this.
  9. DXN1EL

    DXN1EL LawnSite Bronze Member
    from TEXAS
    Messages: 1,233

    The most practical method would be to center the bracket on the mower, then secure it using vise grips or C clamps. Then drill the holes.
     
    Greencuts518 and Hawkshot99 like this.
  10. Ben Harms

    Ben Harms LawnSite Member
    Messages: 41

    Would love to see some photos. Thanks!
     

Share This Page