Byers Gold Parts...need belt!

Discussion in 'Mechanic and Repair' started by jonnywong, Jun 2, 2013.

Tags:
  1. Restrorob

    Restrorob LawnSite Fanatic
    Messages: 11,029


    Sounds about right Breez......
     
    hort101 likes this.
  2. herler

    herler LawnSite Fanatic
    Messages: 5,141

    Yes but Gates.com doesn't list the Bryers mower?
     
  3. Breezmeister

    Breezmeister LawnSite Bronze Member
    Male, from South Jersey
    Messages: 1,695

    Don't know if they do or not...if not, ask. leave a message or call their Tech line 303-744-5651, if they made it for Bryers, they can find it.....I would be really surprised if they could not cross it over to their line.
     
    hort101 likes this.
  4. piston slapper

    piston slapper LawnSite Platinum Member
    Messages: 4,294

    If the belt is too loose...get a shorter belt or a larger idler pulley...
    As old as that mower is...even the factory belt prolly wouldn't fit right...
    If you are waiting for a belt labeled ByersGold...gonna be a long wait...
     
    KyBluGrass and hort101 like this.
  5. jonnywong

    jonnywong LawnSite Member
    Messages: 14

    I am going to take a bit of a gamble on this...

    The belt I have on now is a true blue HD #258-105 its 105"x 5/8"

    now, from what I understand the belt I need was also used in 'landscaper supply' mowers. If this checks out, this belt should be the one I need:

    http://www.landscaperprocatalog.com/guide/LandscaperPro2011/97.asp# (part# 292088)

    Im gonna go ahead and order it, Ill post back when I get it installed.
     
  6. 20ftsnowman

    20ftsnowman LawnSite Member
    Messages: 4

    Hey Jonny, did this belt work out for you? I too have a Byers Gold that is in need of a belt replacement.

    Thanks,
     
  7. Mowingman

    Mowingman LawnSite Platinum Member
    from Texas
    Messages: 4,683

    I think you are out of luck with that question. He has not posted here since way back in 2013.
     
    hort101 likes this.
  8. 20ftsnowman

    20ftsnowman LawnSite Member
    Messages: 4

    Well - I need to figure this out pretty soon. I'll post my findings here - there must be three or four of us out there who still use this mower.
     
    hort101 likes this.
  9. hort101

    hort101 LawnSite Fanatic
    Male, from S.E. New England
    Messages: 5,015

    Try using the numbers on the belt to cross reference,or go to ts or parts store that measure belts Thumbs Up
     
  10. 20ftsnowman

    20ftsnowman LawnSite Member
    Messages: 4

    I ordered a 1/2" x 47" v-belt (goes from the crank shaft to the blade belt hub). I'll post an update once I've installed it.
     

Share This Page