Lawn Care Forum banner
1 - 7 of 7 Posts

· Banned
Joined
·
690 Posts
Discussion Starter · #1 ·
First off-Great Catchers.

Much better than the OEM baggers & Grass Gobblers I've used.

I want to convert my Toro SFS fitted Accelerators to fit my eXmarks.

I assume the pin needs to be shortened & the mounting bracket moved over. I have an Accelerator for eXmark as well so I was just going to copy the mount. Is there anything else I should be aware of?

Thanks
 

· Registered
Joined
·
3,966 Posts
Originally posted by ULTIMATE LAWN
Here's the current mount on my Toro's

My eXmark Accelerators have a smaller pin & smaller & tapered bracket which I am having a hard time duplicating.
As soon as you install the blade belt it will also cut grass:confused:
 

· Registered
Joined
·
551 Posts
Ultimate, Thanks for the nice words about our catchers. To do the conversion, you need a new pin and hook assembly. Give me a call monday and I will send you the part you need.

PS- sorry for not answering sooner. I have been on vacation with my family for the last week.

Peter Andonian
800-984-9410
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top