1. Missed the live Ask the Expert event?
    Catch up on the conversation with Ken Hutcheson, President of U.S. Lawns, in the Franchising forum.

    Dismiss Notice

Changing zspray wand

Discussion in 'Pesticide & Herbicide Application' started by grassmasterswilson, Jan 13, 2013.

  1. grassmasterswilson

    grassmasterswilson LawnSite Platinum Member
    from nc
    Messages: 4,917

    I want to change my zspray wand to match up with my boom output. My thoughts are that I may be able to get the wand from a backpack sprayer and attach it to the existing handle.

    Can anyone share how they did this and what they used?
     
  2. Cadzilla

    Cadzilla LawnSite Senior Member
    Messages: 903

    I've always run an 18" plastic wand on mine and I prefer the brass cone to stream adjustable nozzles but you can use whatever you want.

    I slide the wand into my left side tray right next to the emergency brake. Sits right there ready for use.
     
  3. CHARLES CUE

    CHARLES CUE LawnSite Silver Member
    Messages: 2,340

    Are you trying to replace the cone nozzle with a AI tip ?

    Most of the time you can just remove the cone nozzle and pop it out of the nut and put in a AI nozzle

    If your going to put in a AI tip remember they only come in 110 deg

    I also like going down a nozzle size when you are using the hand wand

    I am not traveling at full speed when hand spraying

    Charles Cue
     

Share This Page