Cheleted Iron in PG?

Discussion in 'Pesticide & Herbicide Application' started by DiscoveryLawn, May 30, 2004.

  1. DiscoveryLawn

    DiscoveryLawn LawnSite Senior Member
    Messages: 408

    Has anyone tried spraying iron with their Perma Green? What were your results?
  2. lordohturf

    lordohturf LawnSite Member
    from SW OH
    Messages: 173

    I would make very sure you empty and thoroughly clean your sprayer after every use. At high concentrations iron can do bad things to a perma green sprayer.
  3. neal-wolbertsinc

    neal-wolbertsinc LawnSite Member
    Messages: 59

    Try a liquid like Supertrace (2-1-2-6% iron) or Speedy Green (15-0-0-6% iron) and you won't have any trouble, except for wheel marks if you use 30-40 oz 1000/sq ft. If you can apply at least 1 gallon of solution 1000/sq ft and water within a few hours the wheel marks will be minimal. Responses should be noticed in one day or less. Rinsing is always a must with any iron product. Neal
  4. DiscoveryLawn

    DiscoveryLawn LawnSite Senior Member
    Messages: 408

    This is an old thread. I am still wondering if anyone has actually tried this. What were your results?

    DUSTYCEDAR LawnSite Fanatic
    from PA
    Messages: 5,132

    go light if u dont it will turn the lawn black
  6. teeca

    teeca LawnSite Bronze Member
    Messages: 1,202

    reading the labe rates for liauid iron, i don't think the permagreen will do it, iron goes down w/ plenty of water like 2-6oz per k. and the lable does not mention low volume applications.

Share This Page