Commercial Property

Discussion in 'Lawn Mowing' started by Miller Rules, Sep 5, 2005.

  1. Miller Rules

    Miller Rules LawnSite Member
    Messages: 66

    I got an idea of what to bid on this job ,But wanted to see what you guys say about it and what you guys would offer besides the basic mowing edging weed eating and blowing off the lot. (Note this is my first one I have no chem lic. and any help would be great)

    Behind building.JPG

    Between 2 buildings 2.JPG

    Between the 2 buildings.JPG

    down right side of building.JPG

    Frnt left of building 2.JPG
  2. Miller Rules

    Miller Rules LawnSite Member
    Messages: 66

  3. Miller Rules

    Miller Rules LawnSite Member
    Messages: 66

    And a few more-By the way whats the best way to mow the ditches?

    front right corner.JPG

    Front right of building.JPG
  4. Miller Rules

    Miller Rules LawnSite Member
    Messages: 66

  5. Shane7258

    Shane7258 LawnSite Member
    Messages: 69

    ()a cut and string trim the ditch's if you take a Z in there you will know why you won't do it again. a 21" may help part of the way but string trim. LOoks like a somewhat gravey run bit the first cut won't be because of the back of the buildings I presume they want that fixed LOL
  6. Turf Troll

    Turf Troll LawnSite Member
    Messages: 227

    I only download @45 k so I couldn't download now I have to make dinner for the family but if its a amount of trimming your going to do each week check out using a plant growth regulator once you get your lic. or not it saves a lot of time for me. I use one variety for turf and another for ditches and banks.
  7. ynvvbr

    ynvvbr LawnSite Member
    Messages: 90

    how many square feet is it?

    how often are you mowing?
  8. ed2hess

    ed2hess LawnSite Fanatic
    Messages: 14,377

    Doesn't look like much possibility of this being much more than mow/trim/blow and go. Something in the range of $50, it looks like maybe 14K total?
  9. LLandscaping

    LLandscaping LawnSite Bronze Member
    Messages: 1,016

    With the pictures shown and a minimal amount of blowing. I would charge $75 cutting once a week.

Share This Page