Cutting pavers part II

Discussion in 'Hardscaping' started by PerfiCut L&L, Mar 11, 2006.

  1. PerfiCut L&L

    PerfiCut L&L LawnSite Senior Member
    Messages: 458

    One more question about cutting pavers. (in general)

    IN your experience, what can do use more often to cut your pavers?
    1 Circular Saw with Diamond blade
    2 Wet Saw
    3 Guillotine plitter

    Also, what advantages and or disadvantages have you experienced with any of these methods?
  2. neversatisfiedj

    neversatisfiedj LawnSite Bronze Member
    Messages: 1,028

    TS400 here.
  3. mbella

    mbella LawnSite Bronze Member
    Messages: 1,284

    Most often, a demo saw such as the TS 400. That is what we use. If you could only have one saw, a demo saw would be the one to have.

    However, if you are even a little bit successful, you should be able to afford a table saw. It doesn't necessarily have to be a wet saw, but just a table saw.

    You should really have both to do quality cuts.
  4. YardPro

    YardPro LawnSite Gold Member
    Messages: 3,570

    we use a cutoff (chop) saw. it runs the 14" diamond blade.
    we bought a really cheap one from lowe's to see how well it would work.
    so far so good.

Share This Page