cutting zoysia with a zero

Discussion in 'Homeowner Assistance Forum' started by mjoiner, Apr 15, 2005.

  1. mjoiner

    mjoiner LawnSite Member
    Messages: 7

    Anybody cutting zoysia grass with a zero radius? I've been looking at a toro or exmark 48-42 cut but a lot of my grass is zoysia. Some have told me that could be a problem. I don't want to spent all the money on a zero if I can't cut all my grass.
  2. jims lawn service

    jims lawn service LawnSite Member
    from midwest
    Messages: 24

    I cut zoysia all the time with a zero turn,I dont know what the problem would be. :)
  3. YardPro

    YardPro LawnSite Gold Member
    Messages: 3,570

    depends on the type.

    if it is a meyer derivative like crown or el Toro, it will be no problem. If it is a fine blade like emrald.... good luck...
  4. Jusmowin

    Jusmowin LawnSite Senior Member
    Messages: 727

    I have 2 yards side by side that are zoysia and I always use my lazer on it. Never had any problems!
  5. Tider6972

    Tider6972 LawnSite Senior Member
    from Alabama
    Messages: 649

    Sharp, sharp blades , frequent maintenance schedule, and you should be OK - let it go, and it'll show !

Share This Page