Design Project

Discussion in 'Lawn Mowing' started by gaorg_3, Oct 2, 2002.

  1. gaorg_3

    gaorg_3 LawnSite Member
    Messages: 2

    Hey guys,

    My name is Greg Sciame and I am an Industrial Design
    student at Georgia Tech in Atlanta, GA. I am re-designing
    an outdoor power tool for my current design project and
    I need some feedback for the research portion of the design
    process. If you have a minute or two, please respond to this

    Thank you,

    Greg Sciame
    B.S. in Industrial Design
    Georgia Institute of Technology

    1.) Do you maintain your own yard?

    2.) Do you own any of the following equipment?
    -chain saw
    -hand saw
    -hedge trimmer
    -hedge shears
    -line trimmer

    3.) If so, how often do you use the equipment? (1=daily 5=never)

    4.) List any current problems you have experienced with this equipment:

    5.) Would you be willing to buy an outdoor power tool incorporating 2 or more of the tools listed above?

    6.) If so, which tools would you like to see paired together and sold as a multi-tool of some sort?

    7.) How much would you be willing to spend on a multi-use tool like this?
    $0-50 $51-100 $101-200 $201-300 $301+
  2. HarryD

    HarryD LawnSite Bronze Member
    Messages: 1,068

  3. CMerLand

    CMerLand LawnSite Senior Member
    Messages: 393

    Id like to see a machete/chainsaw. Man I could cut down trees in no time at all with one of those.

    Just kidding with ya!!!!
  4. lawnperfections

    lawnperfections LawnSite Member
    Messages: 63

    John Deere

    All make them for home or pro's.
    I have found that they more expensive than buying the piece seperately and you end up with alot of use on 1 engine so they don't last as long. My 2 cents

Share This Page