Dixie RPM's

Discussion in 'Lawn Mowing' started by cst51, May 5, 2001.

  1. cst51

    cst51 LawnSite Member
    Messages: 72

    I adjusted my RPM's and they are running approximately between 3770-3790 with the blades engaged. Is this too much or just a little high? I've talked with other LCO's with Choppers and they run theirs at 3750. I assume these numbers are o.k.
  2. Eric ELM

    Eric ELM Husband, Father, Friend, Angel
    Messages: 4,830

    You should be OK with that setting. I run mine at that and have for years and many hours. I did keep mine at 3600 for the first 100 hours.
  3. John DiMartino

    John DiMartino LawnSite Silver Member
    Messages: 2,555

    Id consider your setting perfect,mine seems to like it there,and if you want less ,its easyt enough to back off it a little.
  4. cst51

    cst51 LawnSite Member
    Messages: 72

    Thanks John and Eric.
  5. luckylawnboy

    luckylawnboy LawnSite Senior Member
    Messages: 431

    I have mine set at about 3860 RPM when the machine is not moving with the blades on. Once I get mowing they run right 3750 3800 Seems to be ok. But who knows that might be why my valves clatter off and on.

Share This Page