I did mine with the rustoleum 2 part epoxe kit. It worked relly well, clean it good lots of degreaser, then wipe it with acetone, scuff it good a DA sander would work well, I used a course sanding pad. wipe it out again with acetone. Follow directions, Mine has scratched through a couple of small places but I did it when the temp was just barly warm enough and I did iy while I was on duty at the fire dept If I had done it off duty I would have taken more time.
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.