Does a 32" Wright Velke rut alot?

Discussion in 'Lawn Mowing' started by lonnie, Jan 29, 2006.

  1. lonnie

    lonnie LawnSite Senior Member
    Messages: 317

    Does a 32" Wright Velke rut alot? It looks like a hell of a mower but those skinny tires look very bad. Any opinions?
     
  2. GStover

    GStover LawnSite Member
    Messages: 95

    The rutting was my concern on the WB/Velke as well...tires are really skinny and 545 lbs dry worried me with rutting. Of course, the drive tires on the Stander I'm going to purchase aren't much wider either. I do like the way the Velke folds up though...pretty slick...
     
  3. lonnie

    lonnie LawnSite Senior Member
    Messages: 317

    I dont think that there is any way that the mower could not rut. Thats alot of weight on those tires. The velkey is nice but you mights get ruts with it also because it has a tiny tire also.
     
  4. jtkplc

    jtkplc LawnSite Silver Member
    Messages: 2,656

    I think a lot depends on the skill level of the operator...
     
  5. mcwlandscaping

    mcwlandscaping LawnSite Gold Member
    Messages: 3,163

    Put in as many different patterns as you can if your worried about it. 3 alternating patterns should keep rutting from being an issue.
     
  6. lonnie

    lonnie LawnSite Senior Member
    Messages: 317

    what much height adjustment can you get with the fixed deck? Can you only go up or down one inch from the base height with the front casters.
     

Share This Page