1. Missed the live Ask the Expert event?
    Catch up on the conversation about fertilization strategies for success with the experts at Koch Turf & Ornamental in the Fertilizer Application forum.

    Dismiss Notice

double blades on wright stander

Discussion in 'Lawn Mowing Equipment' started by kawakx125, Jul 22, 2013.

  1. kawakx125

    kawakx125 LawnSite Bronze Member
    Messages: 1,130

    Never run double blades before, thinking of giving it a try to reduce clipping size. how is this accomplished? do you just stack two bolt it up and call it a day? or does it get more complicated, like having to make sure they are perfectly perpendicular to each other? If i go this route it'll probably be a regular lift on bottom and gator on top.
  2. ed2hess

    ed2hess LawnSite Fanatic
    Messages: 14,456

    Maybe just put the mulch kit on....we run it year round on ours. Probably not many people run 2 blades on these spindles. They wear out quick.
  3. kawakx125

    kawakx125 LawnSite Bronze Member
    Messages: 1,130

    i tried it on just discharge side yesterday on my 52 X, too much turbulence and blowout and didn't accomplish what i wanted. mostly this deck just sucks
  4. Hawkshot99

    Hawkshot99 LawnSite Bronze Member
    Messages: 1,431

    I run doubles on my wb around 50% of the time. I run a Gator, and a highlift in a + pattern. The only time I have had them move while in use, is when I have hit a nice size stump.

    Gators leave a horrible cut for me, but shred the clippings great. The high lifts leave a good cut, but I wanted better cut clippings. Now I have both.

    I have a Manuel PTO on my mower, so I just ease the blades on, unlike a electric one where it hits hard. I see no difference on belt life, and have not replaced a spindle in the 8 yrs I have owned my mower.

Share This Page