1. Missed the live Ask the Expert event?
    Catch up on the conversation about fertilization strategies for success with the experts at Koch Turf & Ornamental in the Fertilizer Application forum .

    Dismiss Notice

Drive belt system question.......

Discussion in 'Lawn Mowing' started by Vibe Ray, Mar 8, 2001.

  1. Vibe Ray

    Vibe Ray LawnSite Senior Member
    Messages: 785

    The big Lazer uses a mule drive system to run the deck, the Lazer HP uses a single-plane drive belt.
    Could some one please explain these? What are they and what are the differences. I have heard the term before, but I am not sure what they are......What are the pros and cons of each?
  2. joshua

    joshua LawnSite Bronze Member
    Messages: 1,226

    i looked in the exmark book, it doesn't say a thing. ask your dealer or email exmark at exmark.com. i had a question before and emailed them, they wrote me back the next day with every detail i wanted to know. good luck all the advice i can give you.
  3. Vibe Ray

    Vibe Ray LawnSite Senior Member
    Messages: 785

    Anyone here at LS know?
  4. Evan528

    Evan528 LawnSite Silver Member
    Messages: 2,144

    A mule drive belt system is used on horizonal engines (wich the full size lazer has). Since the drive shaft is horizonal the belt going from it to the deck has to make a 90 degree turn. I have a z master with the mule belt and have not had a single problem with it! The lazer hp's have a verticle engine so the drive shaft is on the bottom... all it take is a belt to go straight to the deck... no turns. I hope this cleared it up for you a little!
  5. Vibe Ray

    Vibe Ray LawnSite Senior Member
    Messages: 785

    Thank you. That does help Evan. Any comments on this topic?

    Also what is up with the new dual mule drive belt system for the Lazer XP? What difference would this make?

    LWNMWRMN Banned
    Messages: 72

    the lazer xp uses dual mule drive belts for a couple of reasons, first, it is a horz. engine. the second, is that exmark wanted to keep the engine as low to the ground as possible and the 5/8" belt that's on the lazer would not make that turn in a shorter distance, but a 1/2" belt would, but a 1/2" belt would only run about 25 h.p. So the only thing that they could do is to use two belts.
  7. Vibe Ray

    Vibe Ray LawnSite Senior Member
    Messages: 785

    Thanx Lawnmower man!

Share This Page