1. Missed the live Ask the Expert event?
    Catch up on the conversation about enhanced efficiency fertilizers with the experts at Koch Turf & Ornamental in the Fertilizer Application forum .

    Dismiss Notice

Ecco leaf blower carb

Discussion in 'Mechanic and Repair' started by Mower Dumby, Oct 27, 2006.

  1. Mower Dumby

    Mower Dumby LawnSite Member
    Messages: 1

    When adjusting the high idle how do you know where you should stop as not to run the engine to lean. The blower I am working on was given to me because it would not run. But after a little tweaking and cleaning I have it running like a top. The only thing is I adjusted the high idle by working on it until it would run wide open and then I adjusted the high idle screw until the air flow was pushing the nozzle as high in the air as it would.
  2. ed2hess

    ed2hess LawnSite Fanatic
    Messages: 13,570

    I do the high run based on the sound/rpm of the engine, I turn it CCW until it starts to drop off in rpm then go back a bit. I don't know why but sometimes the low idle affects the high end rpm also ....it is a tweaking contest but the low end idle usually affects starting if you get that wrong. Sounds like you got it going properly..

Share This Page