1. Can’t make it to the GIE+EXPO 2017?
    LawnSite brings the trade show floor to your fingertips with our new GIE+EXPO 2017 Sneak Peek video series debuting now in the Lawn Mowing forum.

    Dismiss Notice

Enclosed Trailer Guys??

Discussion in 'Trucks and Trailers' started by Palmer'sLS, Feb 26, 2007.

  1. Palmer'sLS

    Palmer'sLS LawnSite Senior Member
    Messages: 535

    Hi all...have a quick question, i have a 6x12 enclosed. I am looking to install some trimmer racks. Question is though, what and/or how do i mount them, everything ive tried hasnt held, looking at the trimmertrap models, thanks
  2. TheLawnBarber

    TheLawnBarber LawnSite Senior Member
    Messages: 539

    Either Trimmertrap or Jungle Jim's enclosed racks will solve your problems.
  3. supercuts

    supercuts LawnSite Silver Member
    Messages: 2,808

    do a search, we've answered this like 3 times in last week or two. mount 1x3 or 2x4's on the wall up and down then mount hangers to them. use self tapping screws into the metal frame behind the wall
  4. lawnagent

    lawnagent LawnSite Senior Member
    Messages: 531

    I was gonna post the same thing. I don't know some of these guys must be rich on here. I looked and it was gonna cost me several hundred dollars to buy racks to go in my enclosed to hang everything I was gonna hang. For less than $75, using the above method ( I used 2x6's ) I made racks to hang 3 trimmers, 2 handheld blowers, hedge trimmers, one backpack blower, 2 gas jugs and a bin to hold oil, string, etc.
  5. GreenN'Clean

    GreenN'Clean LawnSite Bronze Member
    Messages: 1,512

    I use pvc pipe I installed a plank then used U hooks and hung up the pvc pipe to that to hold shovels rakes etc and I bought some hooks at Home Depot for 3 bucks each and installed them to hold my trimmers,blowers etc and it looks good and is a lot cheaper then the expensive racks. I have used this method for the past 4 years and never a problem

Share This Page