Enclosed Trailer mounting kits?

Discussion in 'Trucks and Trailers' started by fairways, Mar 28, 2005.

  1. fairways

    fairways LawnSite Member
    Messages: 51

    Anyone have any good ideas about what to use to hold equipment in an enclosed trailer, besides the really expensive ones you find on the internet!
  2. Petr51488

    Petr51488 LawnSite Silver Member
    from NJ
    Messages: 2,377

    Here's a pick of my trimmer racks that i made.. and a table..

    Picture 1662.JPG

  3. fairways

    fairways LawnSite Member
    Messages: 51

    What are you attaching this wood to within the trailer, with what?
  4. Petr51488

    Petr51488 LawnSite Silver Member
    from NJ
    Messages: 2,377

    Theres gonna be a bolt going on both sides of the flat part of the 2x4, then going into the steel beam going horizontally across the trailer.. i might put them up today and ill post a pic..
  5. kellroy

    kellroy LawnSite Member
    Messages: 39

    Had a friend of mine weld a 5 inch u bolt to a 4x4 piece of flat metal ,drilled holes in the 4x4 and screwed it to the wall and use it to hold a echo backpack blower works great and didn't cost 50 bucks like most bp holders.

  6. rodfather

    rodfather LawnSite Fanatic
    Messages: 9,501

    Etrackstorage.com is what we use...it's awesome for just about everything.
  7. Turtle II

    Turtle II LawnSite Member
    Messages: 152


    The racks you made with basic clamps and wood look like a great idea.

    How are they working out???

    Any problems / issues ??? Is the clamp tension still holding up???

    Have any weed-eaters fallen from a "big bump" ???

    Hope everyone is doing well

    Turtle II:cool:
    Eastern NC
  8. DoetschOutdoor

    DoetschOutdoor LawnSite Bronze Member
    from S. IL
    Messages: 1,818

    Ive had the same setup of the 2x4's with the clamps and they are working great, I wish I would have done this a long time ago instead of pricing around for the expensive ones. I mounted the 2x4s onto the wall using those L shaped brackets and used 2 on each side and they are not coming off anytime soon. Grabbed the wood from a construction site trash pile and spent less than $10 for the clamps and hardware

Share This Page