1. Missed the live Ask the Expert event?
    Catch up on the conversation about fertilization strategies for success with the experts at Koch Turf & Ornamental in the Fertilizer Application forum.

    Dismiss Notice

Enclosed trailer workbench

Discussion in 'Original Pictures Forum' started by Jwgarrison6, Jul 26, 2011.

  1. Jwgarrison6

    Jwgarrison6 LawnSite Member
    Messages: 1

    I have a 7' x 12' enclosed trailer with a v-nose that I would like to put a workbench in (up front). I want to mount my bench grinder on as well as have some storage underneath. Can anyone tell me how to go about doing this, what type of wood to use, how to construct, etc. If anyone has any pics of their enclosed trailer with a workbench in it, I would love to see them. Any help will be greatly appreciated. Thanks!!:confused:
  2. Oakleaf landscape

    Oakleaf landscape LawnSite Senior Member
    Messages: 624


    That has a pic of my workbench in it. I just used 2x4s and plywood to make mine. L brackets hold it to the floor and hold the bench together. It's screwed together with 3 in screws as well. It's not going anywhere.
  3. mlavin73

    mlavin73 LawnSite Member
    Messages: 184

    When I made mine I ran vertical E-track down the sides and front of my trailer. I ordered brackets that go into the E-Track that accept 2 X 4's. I framed it out with that and then cut plywood to fit the top. I got all my bracketry from www.traileroutlet.com. I have pictures in the thread labeled "lets see some trailer setups".

Share This Page