Ever heard of this?

Discussion in 'Lawn Mowing' started by FrankenScagMachines, Apr 26, 2002.

  1. FrankenScagMachines

    FrankenScagMachines LawnSite Platinum Member
    from IN
    Messages: 4,739

    Ever heard of a normal high lift blade with ONE END only offset either up or down to create the same effect as double blades, but with less horsepower draw? I'm thinking about doing this with a single blade mower i'm making (30") and see if it works because this thing will not have alot of hp, but if you had one end offset alittle bit it seems like it would chop alittle off with each end, get it? and then give a better cut with less hp and probably draw less hp than a regular straight blade, right???? ever heard of these kind offset on just one end, not both? Thanks,
  2. Russo

    Russo LawnSite Senior Member
    Messages: 287

    Never heard of this. Do you think that the uneven design would cause poor balance and/or vibration? Interested to see what you come up with.
  3. realtor

    realtor LawnSite Member
    from Ohio
    Messages: 13

Share This Page