[smullen17]

I have owned a older used Ferris walkbehind for a the past four years. The unit is tracking to the right. I put new drive belts on. I cannot locate a manual. The only information I can find on the mower is model BD48/CA Can anyone help point me in the direction of a how to adjust the drive belts? Thanks in advance. Steve

 

[DT Lawn Care]

I have owned a older used Ferris walkbehind for a the past four years. The unit is tracking to the right. I put new drive belts on. I cannot locate a manual. The only information I can find on the mower is model BD48/CA Can anyone help point me in the direction of a how to adjust the drive belts? Thanks in advance. Steve

Okay, didn't take the time to look up your model and info. But on most belt driven walk behinds the drive belts are adjusted by tightening/loosing the rods connecting the handles to the brake/pulley. Just pull the pin from the lower part of the rod and it will be free to adjust. Screwing the rod TOWARD the wheel will tighten up the belt and AWAY from the wheel will loosen it. Maybe yours is different, but that's the way most work.