1. Can’t make it to the GIE+EXPO 2017?
    LawnSite brings the trade show floor to your fingertips with our new GIE+EXPO 2017 Sneak Peek video series debuting now in the Lawn Mowing forum.

    Dismiss Notice

Ferris

Discussion in 'Lawn Mowing' started by lsylvain, Sep 29, 2006.

  1. Dashunde

    Dashunde LawnSite Senior Member
    Messages: 638

    Put some of those thick washers between the blades and the spindles.
    Be careful not to put too many though, you still need plenty of the bolts threads to go in deep enough.
    It may also push your blades down past the bottom of the baffles, no idea if that will matter much.
     
  2. lsylvain

    lsylvain LawnSite Senior Member
    Messages: 778

    Mine you can actually lower the entire deck about 1.5 inches by removing the deck mounting bolts and lowering it. ie. there is an extra set of holes for you to do this. When the deck is in it's normal position the highest level is 4 or 4.5 inches so when you lower it the highest is 2.5 or 3 inches.
     

Share This Page