Fluid film on snowplows...

Discussion in 'Eureka Fluid Film' started by grandview (2006), Sep 9, 2006.

  1. grandview (2006)

    grandview (2006) LawnSite Gold Member
    Messages: 3,465

    What do you think of coating the mold board with fluid film? Will the snow just wipe it off? Anybody try this?
  2. Dano50

    Dano50 LawnSite Bronze Member
    Messages: 1,781

    C'mon guys. I'd like you guys with some experience to answer this one. I know there are some Plowsite members on here...
  3. dcondon

    dcondon LawnSite Silver Member
    Messages: 2,246

    I will let ya know in about 2 months!!!!!!!:waving: :waving:
  4. mcwlandscaping

    mcwlandscaping LawnSite Gold Member
    Messages: 3,163

    me too, but, as soon as i get my plow this week, its getting coated top to bottom in it.
  5. Rickco

    Rickco LawnSite Member
    Messages: 135

    All last winter,after each plowing(very few last year)Mine got power washed,let dry then bathed in fluid film. The whole thing,not just the mold board. Front,back,pistons too.Works great!
  6. grandview (2006)

    grandview (2006) LawnSite Gold Member
    Messages: 3,465

    Just got my sample the other day.I was testing it on my plow and when I sprayed it on any rust it would bubble, but on the cylinder it just covered it with a "Fluid Film":laugh:
    I'll check the JD dealer and see if they carry it and try it this winter.
  7. Grn Mtn

    Grn Mtn LawnSite Senior Member
    Messages: 863

    Yes it works on the plow, however, you will notice dirt sticking to it also, so your plow won't be all pretty looking, it will however be keeping the rust at bay and the snow doesn't stick as much.

    Thanks again for the Tee Dan, but my wife keeps taking it from me:laugh:

Share This Page