1. Missed the live Ask the Expert event?
    Catch up on the conversation about fertilization strategies for success with the experts at Koch Turf & Ornamental in the Fertilizer Application forum.

    Dismiss Notice

For under your mower deck...

Discussion in 'Eureka Fluid Film' started by Dano50, Apr 5, 2006.

  1. Dano50

    Dano50 LawnSite Bronze Member
    Messages: 1,781

    Fluid Film will not only prevent any corrosion but will really help keep grass from sticking. With no solvent content, Fluid Film will not get gummy or sticky. The more often you apply it, the better it will work.:cool2:

    Here are some pictures of what Fluid Film can do when used as a wax:
    Now look at it.
    Not Bad, huh?

    I don't mean to beat you over the head with it :hammerhead: but Fluid Film is going to outlast any competitive product and has a mulititude of uses unavailable to similar products. Here are a few:

    1) Fluid Film will protect battery terminals from corroding for at least a year.
    2) Fluid Film will lubricate hedge trimmers and will help keep sap from sticking.
    3) One no-drip application of Fluid Film as an undercoating will last a full year.
    4) Fluid Film will work wonders in a salt spreader.
    5) Fluid Film is an excellent chain lube because it resists being thrown off, won't just wash off, and since it won't get gummy or sticky dirt won't build on top of itself.

    If you're still not convinced, try a can for free on us. If you haven't tried it before, we'll wager that after you try it you'll agree it's the best product of its kind on the market.
    Fluid Film is available through your local John Deere Farm Dealer, and is made right here in the USA. :usflag:
    Last edited: Dec 4, 2008
  2. Daner

    Daner LawnSite Bronze Member
    Messages: 1,307

    I have been using Fluid Film On our farm equipment when we store It over the Last winter...I have been very Impressed In the results. This year I will also coat my mowers with It as well.
  3. MLawns

    MLawns LawnSite Member
    Messages: 68

    I recieved the sample you sent me last week. Went down to JD dealer and picked up a couple more cans. I'm impressed. Will put a second coat on my bigger machine today and finish the other two machines (it's raining) then I'm going to try it on my lawn while everything is still wet. Already treated my plow and a few rust spots on my old truck. If every thing goes well I may buy a gallon can of it and use a brush, too much waste with a spray can.

Share This Page