Fountain lights

woodlawnservice

LawnSite Bronze Member
Location
oklahoma
I've recently acquired a new property ( my church) that had some 2 hp fountains with lighting. 6 fixtures per fountain all fed by 14-2 wire... problem arose from beavers... they keep chewing up the wiring as well as pump supply wiring.. my questions is, how do I waterproof these splices? I will have to rewire all the fixtures back into the 14-2 wire...?
 

starry night

LawnSite Fanatic
Yes, read the website. The shrink is two stage with an inner layer that melts first and oozes out of the ends of the outer layer as it shrinks. I use them underwater in water features with no problem.
 

Night Owl

LawnSite Member
Location
SE wisco
In order to mitigate the need for repairs, look into Rodent Resistant by Flexo. Before you make a repair next time, slip the appropriate size on the cables. A beaver might be a tough opponent though
 
OP
W

woodlawnservice

LawnSite Bronze Member
Location
oklahoma
In order to mitigate the need for repairs, look into Rodent Resistant by Flexo. Before you make a repair next time, slip the appropriate size on the cables. A beaver might be a tough opponent though
I'm thinking just running through conduit... may slow them down
 

Top