Free Fluid FIlm Samples!

Discussion in 'Eureka Fluid Film' started by Dano50, May 27, 2010.

  1. Dano50

    Dano50 LawnSite Bronze Member
    Messages: 1,781

    Okay, here is your chance to try Fluid Film for free. If you have never tried it and live within the Continental United States, just PM me for your free sample can today.

    Fluid Film will stop corrosion on all metals and will lubricate moving parts for extended periods of time. Without any solvents, Fluid Film will not evaporate, get gummy or tacky, or wash off a surface. You could take a hose and wash off a surface coated with Fluid Film and the product will still remain. It has an all natural lanolin base that actually imbeds into the pores of the metal.

    Highly effective against corrosion caused by salts and fertilizers, Fluid Film is a top-notch chain protector and lube, and is most effective in corrosive or dirty atmospheres.

    Fluid Film is an excellent lube and protectant for hedge trimmer blades. It will help to ease grass build-up under mower decks, as well as condition and waterproof your leather work boots!

    There are too many applications to mention, due to the unique nature of the product. It is safe to use on paint, plastic and rubber, will not burn greenery, and will not freeze, making it an effective ice inhibitor and snow release agent.

    It is non-conductive and is safe to use on electrical components. It will last at least a year protecting battery terminals.

    Check out our website for more information at

    You have nothing to lose but rust!
  2. QualityLawnCare4u

    QualityLawnCare4u LawnSite Gold Member
    Messages: 3,758

    Dano, I want some of it, and never tried it before that I remember!:laugh: And I want Joy to deliver it in person!!:) And I also want a 55 gallon dang drum of it for free, not one of those little itsy bitzy half ounce cans.:laugh: Hey, it doesn't hurt to ask while I'm on a role! For you folks who have never tried it, it is some great stuff.
  3. JoyofFluidFilm

    JoyofFluidFilm LawnSite Senior Member
    Messages: 438

    uh...yeah, like thats going to happen...good try...AHAHAHAHAHAHA:hammerhead:
  4. Lazer_Z

    Lazer_Z LawnSite Silver Member
    from NJ
    Messages: 2,578

    That's not a half bad request, can I sign up for the same??? :D
  5. randosh4

    randosh4 LawnSite Member
    Messages: 179

    Ya us poor CANUCKS never get to try this STUFF.
  6. Fireguy97

    Fireguy97 LawnSite Senior Member
    Messages: 394

    My biggest problem with Fluid Film -

    Why did it take me so long to find out about this stuff??!!

    I picked up my first spray can today. It took me about two hours to coat most of my hand tools that I had on the truck. In the morning I'm doing the tools at the jobsite.

    I love Fluid Film!!

    Most of my hand tools 'were' rusted and pretty stiff with the rust and crud jammed it them over the years of irrigation work, getting them coated with water and mud. Within minutes of spraying the rust was melting off. My pipe cutters were coated with irrigation glue. That stuff sticks and stays on anything and everything it touches. I sprayed my pipe cutters, they now work better than new and the glue slid right off. They now look like shiny new rookies tools with lots of scratches.

    If this stuff works 1/100th as good during the next month as this first couple of hours has been, I'll never be without a can in the truck, and a can in the workshop. For the past hour I've been spraying everything in sight. My load binders, ratchets for my load straps, my big load strap ratchets on my trailer, every rusted surface that I can find on my trailer, all of the mechanical connections on my Ditch Witch, all of my irrigation shovels - I've already tried them out. Dirt and clay doesn't stick to them any more.

    ....And I even had to buy my first can. No samples to Canada. Thanks for your offer Dano! I do appreciate it, but as you know Customs Canada has other ideas.

    Have to go and find more stuff to spray.

  7. Fireguy97

    Fireguy97 LawnSite Senior Member
    Messages: 394

    Canadian Tire - $14.95 -- Worth every penny!!

    I love Fluid Film!


    DLAWNS LawnSite Fanatic
    Messages: 5,780

    That's an awesome review! :clapping:

    SKYNYRD LawnSite Fanatic
    Messages: 10,447

    welcome to the army my friend[​IMG]
  10. JoyofFluidFilm

    JoyofFluidFilm LawnSite Senior Member
    Messages: 438

    Woohoo!!! Skynyrd, we're recruiting more Fluid Film people!! YAY!!!!!!!!!!!!!!!!!

Share This Page