gator blades

Discussion in 'Mechanic and Repair' started by ghuber09, Mar 13, 2013.

  1. ghuber09

    ghuber09 LawnSite Member
    Messages: 35

    Anybody try gator blades on wright standers? Cut any better?
  2. Oli

    Oli LawnSite Member
    Messages: 40

    I have used Gator Blades on several pieces of equipment. The quality is equivalent to an OEM blade. On a non-mulching deck, the cut appears to be the same as the OEM blade. On a mulching deck, the clippings are slightly finer. They do a great job mulching leaves with either style of deck which is why I use them.
  3. Valk

    Valk LawnSite Silver Member
    Messages: 2,722

    The standard/original 3in1 Gators do not create as much lift as a hi-lift or the new G5 or G6 Gators by Oregon. However, due to the added lift/vacuum of the G5/G6 blades they have recommended they be used for side-discharging...(or possibly bagging). The added lift/vacuum will contribute toward more blowout.
  4. ghuber09

    ghuber09 LawnSite Member
    Messages: 35

    Thanks for the answers, appreciate it.
  5. Patriot Services

    Patriot Services LawnSite Fanatic
    Messages: 14,274

    Its all we use on our Wrights. No kit, just a blocker plate. No problems with blowout or stringers. I know they are for side discharge but they work fine for us on summer turf. We do switch to flats if gets too dry to hold down on dust.
    Posted via Mobile Device

Share This Page