I have a 36" belt drive gravely prosteer and the steering arms have become very stiff. Anyone know of something I am missing while lubing? Or maybe it is another problem.
There is a center bushing inside your steering arms where the bolt goes thats mounting them to the frame, There is no grease fitting for these. To repair the problem; Unbolt the arms and spray with penetrating oil and knock the bushings out, Clean the bushings up and the inside of the arms and grease them up and reassemble.
I had looked at the whole linkage and this was the area that I could see that could have the problem. Thanks for your help and I will do that.
