1. Missed the live Ask the Expert event?
    Catch up on the conversation with Ken Hutcheson, President of U.S. Lawns, in the Franchising forum.

    Dismiss Notice

Gravely walk behind spindle bearings

Discussion in 'Mechanic and Repair' started by challenger, Apr 10, 2008.

  1. challenger

    challenger LawnSite Member
    Messages: 7

    Hello all-I'm new 2 this forum and find it very informative. I have an 1995 made Yard Pro-w-50" deck & 14hp Kawasaki. The original stamped deck rusted out completely so I fabricated a new deck out of 3/16" CRS. I also wanted to replace the spindle bearings and got a price of $26.00 PER BEARING! For anyone interested I did a little research and it turns out these are typical bearings used in boat trailers and I bought all six for $4.00/ea!
    Anyone-w-other money saving tips for parts for these super protected units? I can also use a service manual if anyone might have a resource-I called Ariens and the only thing they have is the Owners/parts manuals-good for free off web site.
     
  2. Albemarle Lawn

    Albemarle Lawn LawnSite Bronze Member
    Messages: 1,544

    That is GUNG-HO dude!
     

Share This Page