1. Missed the live Ask the Expert event?
    Catch up on the conversation about fertilization strategies for success with the experts at Koch Turf & Ornamental in the Fertilizer Application forum.

    Dismiss Notice

HELP! Molded seat cushion/cover seperating from frame.

Discussion in 'Mechanic and Repair' started by PEVO, Nov 14, 2012.

  1. PEVO

    PEVO LawnSite Member
    Messages: 211

    Suspension seat on my 05 Hustler super-z has come apart. The frame is fine & seat still works but the cushions seperating.(backrest & now seat starting too...to) I'm sure this has been addressed before...but how to reattach the molded ridgid foam to the seat frame & reseat the seam all the way around it. The black cover is still in very good condition so i'm not really considering spending $350 to replace the whole thing. Anybody run into this before & how did you fix it? thanks
     
  2. dutch1

    dutch1 LawnSite Silver Member
    from Jayhawk
    Messages: 2,249

  3. BrunoT

    BrunoT LawnSite Senior Member
    Messages: 741

    I had one do this this fall. If its like mine get some clamps and gorilla glue (or similar) and just run a bead of glue on it and clamp it down. Now you couldn't pull it off.
     

Share This Page