hi new to the site but hope 2 help and get help! i just put in a new full/compleet 20hp kohler motor in a walker mower and it will not stay running! it runs 4 around 4 seconds then shuts down. i have done the folowing.
`made shur spark stays till it cuts out
`has fule pumping in to carb till it cuts out
`allso fule is in the carb bowel and flote moves freely
it has fresh gas, and i have made shure the fule is meating the carb, plus it is filling the bowle. so pasage is clear to the carb. and fuel pump is working thanks! for the info any help is good help
yes i did fill it with the 2 quarts of 30w oil that was recomended and to make the others point clear i did mean it will start and run for around 4seconds. and i will listen for the click and check for power on that solenoid on the carb thanks guys 4 all the feed back! i get back 2 u all 2 Morrow
to make that running time clear it will start and run for around 4seconds. and i will listen for the click and check for power on that solenoid on the carb thanks guys 4 all the feed back! i get back 2 u all 2 Morrow
thanks 4 all the help full hints guys i found a pinched wire in the wire loom!! haha a little solder and heat shrink and it runs like a dream!! love the kohler engines but I'm getting sick of the Walkers mowers there in.
This is an older thread, you may not receive a response, and could
be reviving an old thread. Please consider creating a new thread.
Lawn Care Forum
A forum community dedicated to lawn care and landscaping professionals and enthusiasts. Come join the discussion about performance, modifications, classifieds, troubleshooting, maintenance, and more!