1. Can’t make it to the GIE+EXPO 2017?
    LawnSite brings the trade show floor to your fingertips with our new GIE+EXPO 2017 Sneak Peek video series debuting now in the Lawn Mowing forum.

    Dismiss Notice

Help Toro proline walkbehind part not available

Discussion in 'Mechanic and Repair' started by kmacd, Apr 27, 2010.

  1. kmacd

    kmacd LawnSite Member
    Messages: 12

    I pulled the engine on my Toro proline 36". I ended up bending the pulley blade drive getting it off. Man I had the sleeve cherry red and it still would not come off.

    The pulley blade drive (part number E303555), this is the big pulley on the bottom of the drive shaft.

    I have looked online at several sites and they all say "Part not available". Does anybody know a cross refrence part number that would work for this?

  2. topsites

    topsites LawnSite Fanatic
    Messages: 21,653

    Maybe try the following Google searches WITH the quotes:

    At some point in time they switched the system from E to 1 but the last 6 digits remained the same,
    so as you might gather all I did was replace the E with a 1 in two of those, also I added a dash '-'
    on every second, then some places use a dash and some don't but to my understanding these are
    the numbering systems most commonly used for toro parts

    Also if those don't work try adding toro to the search outside the quotes, for example:

    "E303555" toro
    toro "E-303555"
    and so on...

    Other variations might include:
    "1-303555" pulley
    "1303555" pulley toro

    Then if you still ain't getting nowhere try searching through Exmark parts.
    Obviously once you get to "1-303555" pulley toro exmark and you're still getting nothing,
    we'll have to try something else.
    Last edited: Apr 28, 2010
  3. kmacd

    kmacd LawnSite Member
    Messages: 12

    I called Toro this morning and they changed the part number to 103-1668, for some reason or another.
  4. All_Toro_4ME

    All_Toro_4ME LawnSite Bronze Member
    Messages: 1,578

    guess I'm a little late on this thread, but another trick you can try in the future is to put an asterix (*) after the part number or your partial part number if you have that. The asterix will act as a wildcard and in most cases be helpful in finding the appropriate part #.

Share This Page