home made strippin kit

Discussion in 'Lawn Mowing' started by lawn masters 2006, Jan 11, 2006.

  1. lawn masters 2006

    lawn masters 2006 LawnSite Member
    Messages: 52

    lookin for ideas on how to make a strippin kit for my mowers? i have seen the the chan idea,but think chains will catch on my trailer gate...
    any ideas???
  2. Ol'time Lawncare

    Ol'time Lawncare LawnSite Senior Member
    from NJ
    Messages: 497

    use a couple of pieces of steal for the arms,drill some holes so you can bolt some all thread to mount rolling pins from the bakery and set it up:confused:
  3. chimmygew

    chimmygew LawnSite Senior Member
    Messages: 578

    What brand of mower and what model do you have?
  4. fcl01

    fcl01 LawnSite Member
    from OHIO
    Messages: 249

    in the past, i've used brushes from a lawn sweeper and bolted them to the deck. works great.
    or, you can buy 24"W x 36"H x 1/4"T mud flaps from northern tool for $10 ea., cut to size and use a piece of flat steel to run along the top edge and put bolts through it to secure it to the deck. very inexpensive and effective.
  5. dsmrolla06

    dsmrolla06 LawnSite Senior Member
    Messages: 305

    i also thought mud flaps would work well. I think it would be more consistant than chains or rollers, and would conform to uneven ground. I want to put one on my 61" ferris, would they make a flap wide enough?
  6. CompletePropertyCare

    CompletePropertyCare LawnSite Member
    Messages: 64

    Stop a plow shop and look at the different rubber flaps the use. Should be helpful

Share This Page