Honda 4120 blowing ignition fuse

Discussion in 'Mechanic and Repair' started by georgetowson, Jul 27, 2011.

  1. georgetowson

    georgetowson LawnSite Member
    Messages: 1

    I have a Honda 4120 that won't start because the top fuse on the
    back side of the ignition switch assembly blows when the key is
    turned to start. This occurs even when the solenoid is not connected
    to the ignition switch ( battery cables only connected to large
    terminals on solenoid ).
    I have replaced the battery, solenoid, and starter.

    Thanks for any advice.:confused:

Share This Page