1. Can’t make it to the GIE+EXPO 2017?
    LawnSite brings the trade show floor to your fingertips with our new GIE+EXPO 2017 Sneak Peek video series debuting now in the Lawn Mowing forum.

    Dismiss Notice

how do you program hunter node?

Discussion in 'Irrigation' started by grass disaster, Jul 8, 2012.

  1. grass disaster

    grass disaster LawnSite Silver Member
    Messages: 2,748

    my client has new sod and i cant get on it to cut it because there is standing water.

    i took a look at the control and i cant get it figured out.
     
  2. irrig8r

    irrig8r LawnSite Platinum Member
    Messages: 4,553

    Look at the owner's manual. I've never used it and don't know how it's different than the SVC. I still have a lot of SVCs in the field.

    http://www.hunterindustries.com/media/1919
     
  3. grass disaster

    grass disaster LawnSite Silver Member
    Messages: 2,748

    That will work. Thanks.
    Posted via Mobile Device
     
  4. HunterTekGeek

    HunterTekGeek Sponsor
    Messages: 312

    Here is a link to the owner's manual: http://www.hunterindustries.com/sites/default/files/OM_NODE_dom.pdf

    If you know how to Program a Hunter Pro-C then you know how to program a NODE. Unlike the SVC, the NODE has Programs A/B/C, 4 Start Times each, and Weekdays/Odd-Even/Interval water days. In other words, it programs like most standard controllers on the market.

    Example: Program A - 6:00 AM Start with Mon/Wed/Fri water days. Set each station's run time in Program A and you are finished. NODE will run each station in sequence automatically. Unlike SVC, you DO NOT need a separate start time and water days for each station.

    Call Hunter Tech Service at 1-800-733-2823 when you have it "in hand" and they can help you program it quickly. Hope this helps.
     

Share This Page