How to remove Scag engine

harrywat

LawnSite Member
Location
Newton, MS
Does the engine mount plate come out with the engine? It appears that 7 bolts would set it free. I can't see a way to get to the four engine mount bolts. Does anyone know a source for engine removal instructions? This is a TTS 52" with 25CH Kohler.
 

ed2hess

LawnSite Fanatic
I just took one off.....4 bolts hold the engine and easy to get to. Clutch needs to come off and all the rear bumper devices to make it easy.

20140711_095405.jpg
 

djagusch

LawnSite Platinum Member
Location
MN
I just took one off.....4 bolts hold the engine and easy to get to. Clutch needs to come off and all the rear bumper devices to make it easy.

That's cub/cat not a turf tiger. Anyways the op needs to get things out of the way to get to the bolts.
Posted via Mobile Device
 
OP
H

harrywat

LawnSite Member
Location
Newton, MS
Thanks for the help Diesel, Ed and DJ. You guys nailed it, I removed the starter, ground wire, clutch, breather and unplugged electric. Four bolts and pulled it out. I've got a new short block to build up with the old parts but going to take some pictures first, I have a good memory but its short.
Thanks again, I had decided getting to the bolt heads would not be easy.
 

Top Forums



Top