Hunter Pro C Display

Discussion in 'Professional Discussions' started by mitchgo, Jun 14, 2018.

  1. mitchgo

    mitchgo LawnSite Gold Member
    Messages: 3,491

    I See this ALL The time. So much so that I believe it's a feature apart of the controller. Though I have never looked into it.

    My question is- Say Zone 5 is 2 hours 32 minutes and I press one adjust button and it drop downs to 15 minutes . Is the zone really running a 2.5 hours or is it running @16 Min ??

  2. greenmonster304

    greenmonster304 LawnSite Platinum Member
    Messages: 4,076

    I see it on the first generation of pro c clocks never on the newer ones.
  3. AI Inc

    AI Inc LawnSite Fanatic
    Messages: 27,300

    It is trying to tell you that your % is not set to 100%
  4. magna111

    magna111 LawnSite Senior Member
    from NJ
    Messages: 435

    So it’s set to 1000% (one thousand percent)?
  5. Txman32

    Txman32 LawnSite Member
    from DFW
    Messages: 76

    It’s a face plate malfunction. It will never keep proper time once that starts happening. Those are the older pro-c controllers. You can replace the face plate and that will fix or replace the controller.
  6. magna111

    magna111 LawnSite Senior Member
    from NJ
    Messages: 435

    I hadn’t seen that in a while until last week. In addition to the 1:20 2:40 6:00 times, this particular clock had the year set at roughly 1873, and when I went to set the day it was at day 99. It also had days u9 u8 u7... d9 d8 d7... day 0 ... because of all those extra days the number and day of the week did not match up ...



  7. AI Inc

    AI Inc LawnSite Fanatic
    Messages: 27,300

    Panel is toast. retails for around $89
  8. irritation

    irritation LawnSite Gold Member
    Messages: 3,868

    Yea, I see it all the time too, but Hunter denies it like PGP seals.
    mitchgo, ArTurf and zr100 like this.
  9. TX Easymoney

    TX Easymoney LawnSite Platinum Member
    Messages: 4,300

    I hate own at the house does that....I resorted to monitoring my flow to make sure it's not actually running 2 far it isn't...I would have liked to upgrade the faceplate to the new Wi-Fi but mine is 10 years old so it wouldn't work...I'd really like to try a wireless flow sensor...
  10. RhettMan

    RhettMan LawnSite Silver Member
    from Texas
    Messages: 2,935

    Ron is loving this. :laugh: :drinkup:

    "Life is a beautiful balance of Chocolate one day, and shi* the next."

    Tomorrow a SMT will crap out.

    P.S. My Bias is for sale :)

    Much love yall.


Share This Page