Well some of you might remember I posted pics of my new Husqvarna floating deck walk back when I bought in FEb. I have used it now for a solid week and a half so I thought I would do a little review. There are things I both love and dislike about the mower. So I guess Ill start with the things I love and go from there. The quality of cut on this machine is like nothing I have ever used. It gives by FAR a better cut than any of my Exmarks do. Before you Exmark fans disagree with me, remember I am also an Exmark fan, and I am by no means bashing Exmark. But its true, I honestly have never cut with anything that cuts so nice, and my other Exmark wbs are still on the trailer. The machine throws grass clippings so fine I have yet to double cut anything in a week and a half. And some of the lawns, especially the ones I treat, were fairly high and wet. Im sure this has alot to do with moving up from a 15hp 48" combination to a 18hp 48" combination. But at any rate IMHO I would feel confident putting the Huskys cut quality up against any hydro WB on the market. It is honestly that good. The ETS controls are great. They are basicly the same as the ECS controls on Exmarks. For me I feel my hands are in a more natural position on the Husky though. The controls took me a while to get used to, and they are a little touchy, but now that Im used to them I really like them. The height adjustment is flat out awesome. It is so nice to have a true deck lift on a WB. You can literally pull the deck up into trailering position, while mowing, to go over objects in the lawn, without hitting them, and then drop the deck back down without ever stepping off the sulky. Also I am very impressed with how well built the machine is. I cant speak for the long term reliability of the machine after only a week. But I dont forsee any problems. The machine is tight. Now lets get to some dislikes. There is not nearly enough anti scalp rollers on the machine. There are only two antiscalp rollers on each side of the deck. It also needs two in the center of the deck. I did not notice this when I bought it. This has created some scalping concerns. Now that Im used to it, I can make sure this dosent happen by tilting back on the machine in certain instances. But I feel with a true floating deck, I shouldnt have to do this. I have a friend who is a welder. I am planning on having him make me brakets for two rollers on the front of the deck. This should eliminate this problem. Although, I am not real happy I have the need to do that. My only other problem with the machine is that the length does make it less versitile than my Exmarks. The length also makes it easy to pop a wheely while sulkying up hill. They actually sell wheel weights for the front of the machine. I am not having a big enough problem, that I feel I need them. But now I can see why they sell them as an accessory. At any rate, I am very pleased with the mower so far. Right now Im just in like, not in love. If adding those rollers, ends my minor scalping concerns I think it will be a happy marriage. Anyway for any one who is considering one. It is definately worth a demo. Especially at almost a $1000 less than Exmark and Hustler. __________________ I do not do this for the love of the game. I do this for the money.