1. Missed the live Ask the Expert event?
    Catch up on the conversation about fertilization strategies for success with the experts at Koch Turf & Ornamental in the Fertilizer Application forum.

    Dismiss Notice

Hustler Fastrak 54 inch with Kohler 20HP Engine

Discussion in 'Mechanic and Repair' started by robblac1, Dec 21, 2012.

  1. robblac1

    robblac1 LawnSite Member
    Messages: 2

    Hi guys,
    Help required, their is probably a thread on this already, but can some post the method with pictures on how to replace the Pump/drive belt on a Hustler 54 inch deck with a Kohler 20 Hp engine. Main issue I cannot get my head around is do I have to take the whole clutch off to get the new belt on, because that's how it looks withouy the correct information.
    I know or the stuff about taking the tension out of the deck belt etc, it just how to get the new pump/drive belt onto the clutch without taking it off.....:confused:
  2. LouBraun

    LouBraun LawnSite Member
    Messages: 6

    Directions for belt replacement are in the manual. Just release tension on the belt before replacing it.

    An excerpt is attached.

  3. robblac1

    robblac1 LawnSite Member
    Messages: 2

    Thanks for the reply. Mine is a 2006 model and the engine pulley seems to be attached to the clutch pulley. The bely is off because it broke, so although I can put the new belt on all the other pulleys I cant seem to left it over or under the engine or clutch pulley because they are joined?

Share This Page