Separate names with a comma.
Missed the live Ask the Expert event?
Catch up on the conversation about fertilization strategies for success with the experts at Koch Turf & Ornamental in the Fertilizer Application forum.
Discussion in 'Lawn Mowing' started by rev2damax, Apr 8, 2008.
Can a Hustler Flex seat base retrofit to be used on a exmark?
I'm sure it can be done, if you have a good amount of fabricating skills.... if its a direct bolt on application ... i dunno , exmark and hustler both use the michigan suspension seat I think... either way good luck!
Part of the Flex Seat attachment protrudes below the seat. You will need clearance for this.
See photo of underside of a Flex Seat installed on a Hustler on this thread:
pix!! when you get it done.
I'll give you a deal on one that was on my Hustler for 3 days if you want to try.
Top 2 photos are of the Exmark Seat plate.
Seat mounting bolts are 11-1/4" apart. The frame is 12" wide.
Bottom Photo is of a Hustler Flex Seat Plate on Puppypaws machine.
The hole in the Hustler seat plate is 13" wide. This is 1" wider than the entire seat mounting frame on the Exmark.