1. Can’t make it to the GIE+EXPO 2017?
    LawnSite brings the trade show floor to your fingertips with our new GIE+EXPO 2017 Sneak Peek video series debuting now in the Lawn Mowing forum.

    Dismiss Notice

hustler grass catcher

Discussion in 'Lawn Mowing' started by thom, Mar 29, 2010.

  1. thom

    thom LawnSite Member
    Messages: 159

    I need to put a grass catcher on my hustler.what are you all using?
     
  2. Landscraper1

    Landscraper1 LawnSite Senior Member
    Male, from Southeastern Ma.
    Messages: 753

    grass gobblers.
     
  3. JB1

    JB1 LawnSite Fanatic
    Messages: 5,904

    the yelllow metal thingy.
     
  4. WholeSaleSteve

    WholeSaleSteve Inactive
    Messages: 36

    Hustler makes a full line of grass catchers. They work very well. What Hustler do you have? I can help you with pat numbers if you like if you give me your model mower. Take care.
     
  5. thom

    thom LawnSite Member
    Messages: 159

    I have a hustler fasttrak 54". it is a residential model,but it has served me well.
     
  6. WholeSaleSteve

    WholeSaleSteve Inactive
    Messages: 36

    Even though that model is listed as a residential model you will find the hydros, decka nd frame are essentially the same as on the Super Duty which is considered commercial. The deck idler pullys are not metal but many folks replace themw ith metal ones when they fail.

    Hustler makes a twin bag grass catcher part number 928960. You also need adaptor 109835 for it to fit on your 54"

    Good luck. Let me know if you need anything else.
     
  7. clean_cut

    clean_cut LawnSite Bronze Member
    Messages: 1,327

    How does the hustler bagger (grass gobbler) compare to an accelerator bagger?

    Sorry the grass gobbler is made by wright, anyway, how does it compare to an accelerator?
     
  8. Landscraper1

    Landscraper1 LawnSite Senior Member
    Male, from Southeastern Ma.
    Messages: 753

    The accelerator is a great catcher. Made of aluminum which makes it much lighter than the Gobbler. But, with the Gobbler you can easily repair it with a cheap lincoln welder. Good luck on fixing a broken Accelerator.
    If you have a rider, then you are better off with a collection system, rather than a grass catcher.
     

Share This Page