I Got A Problem And I Need Some Help Asap

Discussion in 'Mechanic and Repair' started by scagboy227, Apr 23, 2005.

  1. scagboy227

    scagboy227 LawnSite Member
    Messages: 151

    I got 2 problems,

    1.My scag 48 inch mower with a briggs 16hp v twin wont shutoff when i let off the kill handles.
    There is a loose wire witha plug near the engine but i dont know where it goes

    2 I need a 1 wheel velky red/orange asap i want a used one cause im not wanting to buy a new one
    Anyone with one please help me ill pay a reasonable amount .
  2. proenterprises

    proenterprises LawnSite Silver Member
    Messages: 2,296

    Well. Common sense. Reconnect the wire that is loose, good chance that will solve the problem.
  3. scagboy227

    scagboy227 LawnSite Member
    Messages: 151

    i can not find where it gies i have looked everywhere
  4. EWIRedMaxRep

    EWIRedMaxRep LawnSite Member
    Messages: 18

    Assuming u have a 303??? model. These have a diode in the killwire between the coils. if this diode goes bad, it can kill the coils or allow the coils not to be grounded.Diode harness is beneath the blower housing between the coils. The purpose is to prevent cross talk or cross triggering of the coils. I would bet that if the kill on the unit is operational that is the problem.
  5. The Lawn Ranger

    The Lawn Ranger LawnSite Member
    Messages: 10

    how bout just switching to the best. Hustler then you will have no compliants and no worries.
  6. jim dailey

    jim dailey LawnSite Senior Member
    Messages: 614

    I've got your one wheel sulky. Really nice shape. BUT, it is BLACK. Let me know.

Share This Page