Is 3.5 bushel bagger supposed to fit on eXmark Lazer Z?

Discussion in 'Lawn Mowing' started by roscioli, Jun 17, 2003.

  1. roscioli

    roscioli LawnSite Senior Member
    Messages: 749

    Boy- I am new thread central today.... I started looking at my exmarks today, my metro and my lazer, and the bagger from the metro looks like it should fit the lazer, but doesnt by about 1/8 inch... is that on purpose, or should I be able to use it?
  2. MasterForm

    MasterForm LawnSite Member
    Messages: 83

    If you're off by much, there's different holes the back "triangle" shaped bracket can adjust to.

    I've seen them be off by a little and a hammer needs to bend the front tab that slips into the hole a little.

    Do they work on a Lazer? Yes.

    Do you want to mow with a rider and only 3.5 bushel catcher? No very often.
  3. roscioli

    roscioli LawnSite Senior Member
    Messages: 749

    The good news is that it works! Bad news is that I have confirmed how stupid I am by not seeing those adjustments! Haha, it looks really funny, but it works, so far, so good. I will test it tomorrow in some heavy grass and see how quickly it fills. I see one problem, the same it had on the metro, weight distribution, the left tire skids easily with it full, will be a problem on hills, but easy enough to solve with a counter weight of some sort. Thanks MasterForm for the advice.... I will let you all know.
  4. Runner

    Runner LawnSite Fanatic
    Messages: 13,497

    In heavy grass, it fills in about 20 - 30 feet.:rolleyes: Great for doing narrow strips or sucking up litter, though.
  5. roscioli

    roscioli LawnSite Senior Member
    Messages: 749

    Thats what I am figuring will happen, but I still have half (the left half) of my mulch kit installed, so I am hoping that it will chop them up well. Rain today, so I guess I won't find out today...

Share This Page