Is the Toro Z Stand worth a flip ?

Discussion in 'Lawn Mowing' started by tb8100, Jun 1, 2008.

  1. tb8100

    tb8100 LawnSite Bronze Member
    from TX
    Messages: 1,625

    Does it lift the mower up high enough to get to anything? :confused:
  2. ALarsh

    ALarsh LawnSite Silver Member
    from Midwest
    Messages: 2,412

    Yes it works very good and has saved us many times in the field.
  3. tb8100

    tb8100 LawnSite Bronze Member
    from TX
    Messages: 1,625

    Cool. Thanks!
  4. tportela

    tportela LawnSite Member
    Messages: 41

    How high does it lift the machine off the ground, enough to scrap and clean ??
  5. N.TX

    N.TX LawnSite Senior Member
    from TEXAS
    Messages: 473

    It works great. I used it all the time to change blades, scrape the deck, ect.... I have a grasshopper now and its a great machine but i miss that z stand. I think the toro is a great machine too but i dont like the local dealer.

    STIHL GUY LawnSite Fanatic
    from CT
    Messages: 5,226

    i just lift the deck and put a cinderblock onder each sied and it works fine
  7. MOW ED

    MOW ED LawnSite Fanatic
    Messages: 5,028

    Mine lifts a 62" deck high enough that I can use a regular impact wrench to change blades. Oh it has a torque wrench feature so I can be sure my blades are torqued exactly to spec.
    The stand works real well.

Share This Page